First you need to calibrate your TQ6, so open your Control Panel and then Game Controllers. The TQ6 should be in the games controllers’ list. Choose your TQ6, and then click on properties. You should now see a picture of the TQ6 in the calibration window, like the example below. Now click on calibrate and… read more
Each axis on the GF-RP2 system can be configured for any function using the controls setting within FSX or FS9. To access this menu, go to Settings>Controls. Select “Control Axis” to change the individual function of each axis. Select “Calibration” to configure controller settings such as sensitivity or null zones. For each of these screens,… read more
With the rudder base facing toward you, plug the pedals into the base (RED wire facing to the right.) Then place the pedal on the rudder base and use the (8) – 6/32 screws, to attach the pedals to the base.
After unpacking, please verify that your GF-TQ6 package contains the following items: Quantity Description 1 GF-TQ6 Throttle System Module enclosure and control assembly. 1 2-meter USB Cable. 4 Nylon 6-32 x 3/8” mounting thumbscrews. 4 Adhesive-backed rubber feet. 2 Detent plates for jet spoilers and flaps. The GF-TQ6 ships from the factory in a (4)… read more
Our Hardware is compatible with a wide range of popular flight simulation titles, including Microsoft’s Flight Simulator X, Flight Simulator X Steam Edition, Lockheed Martin’s Prepar3d, and X-Plane. For specific compatibility information with other titles, please contact the software developer.
Plug your headset into the “MIC” and “HEADSET” jacks on the front panel. (Your speakers may be plugged into the rear of the card or into the front panel.) There are two controls on the front panel of your GF-ATC: VOL knob is to set the volume you desire of the overall sound to your… read more
To use the MCP Pro with the built-in aircraft included in Microsoft® Flight Simulator 2004 and FSX, run GF-Config and select the MCP Pro device, then choose the FS DEFAULT mode selection in the MCP Pro Configuration View. This allows you to use your MCP Pro for more realistic operation of the Boeing aircraft included… read more
Your GoFlight product will work seamlessly with all Airport, Terrain, Weather and other scenery add-ons for FSX and X-Plane. Some suggested products and/or developers are: Orbx http://fullterrain.com Real Environment Extreme http://realenvironmentextreme.com
Many GoFlight Hardware Modules will work seamlessly with X-Plane right out of the box. However, if you wish to have a little more control over your modules, we recommend the GoFlight X-Plane Configuration Tool by PollyPot Software. This tool allows for full customization of the many functions of your GoFlight Hardware within X-Plane. For more… read more
The TOGA or Auto throttle button can be programmed thru Flightsim for the default aircraft. To program go to settings, then controls, then click on the Buttons/Key Tab make sure that your TQ6 is in the controller type window. Now scroll down and find the TOGA function double click on the function then a box… read more