Important Notice During this COVID-19 Pandemic

Hello to our amazing customers and fans. Do to the out break of the corona virus and a order form state government, executive order No.20-12, In compliance with this order. GoFlight has temporally closed its doors. We will continue to accept orders, but we will not ship until the executive order has been lifted.

PLEASE NOTE: While we are closed. A cancellation fee of 10% will be incur if an existing order is cancelled.

Call Today:  503-901-7573
You're a Go with GoFlight
Contact Us

Blog

Installation the GF-TQ6 & GF-TQ6 advance Software

Using a web browser go to http://www.goflightinc.com. On the GoFlight home page click “Support. Click on “GF Config x.xx” to download the latest module drivers and configuration software. Click “Run” or “Save” and follow the instructions to install the software. If the software installer detects that GoFlight software is already installed on your system, it… read more

Rudder Pedal Included Items GF-RP2

Your purchase includes the following items: One (1) GF-RP2 Rudder System One (1) USB Cable Two (2) Rudder Pedal Assemblies Eight (8) 6/32 Screws One (1) Allen Wrench Four (4) Rubber Feet Two (2) Velcro Strips If any of the above items were damaged or missing during arrival, please contact us.

Operating the GF-LGT II

Elevator Trim The wheel on the left side of the GF-LGT II panel is used to adjust your Flight Sim aircraft’s elevator trim. Move the wheel upwards to trim the nose of the aircraft down. Move the wheel downwards to trim the nose of the aircraft up. Aileron Trim The wheel on the top of… read more

Mounting the FG-TQ6

Rack and Custom Mounting The GF-TQ6 is designed for direct installation into the GoFlight GF-AC Full Height Rack or the Flight Deck Console (FDC) enclosures. Four 6-32 x 3/8” nylon thumbscrews are provided for this purpose. If you wish to mount the GF-TQ6 into a custom cockpit, threaded 6-32 holes are provided on the bottom… read more

GF-MCP Pro Suggested Add-on Aircraft

Several add-on aircraft packages are available for Microsoft Flight Simulator that provide a much fuller simulation of these advanced aircraft autopilot systems, and allow high fidelity use of most, if not all, MCP Pro controls. For more information, we encourage you to visit the following software publishers’ Web sites. ProSim 737 http://www.prosim.com PMDG737NGX http://www.pmdg.com Ifly… read more

GF-MCP Pro Operation

The MCP Pro is designed to closely resemble the look and function of the Boeing 737NG aircraft’s MCP (Mode Control Panel) in color, control layout, and dimensions. The “real-world” 737NG MCP is a complex piece of equipment with many displays, knobs, and switches. Its purpose is to give the pilot control of all the various… read more

GF-MCP Pro Not Working with FSX

If your MCP Pro is functioning in other simulators but not FSX, try the following fixes: Depending on your permissions settings, FSX may need to be run in Administrator mode to detect your hardware. This can be done by right clicking on FSX, and selecting “Run As Administrator” If these solutions do not work, please… read more

Installing the GF-MCP Pro Software

NOTE: If you own other GoFlight hardware and have already installed the same or more recent version of GoFlight software than that was included with your MCP-Pro, you do not need to install the software again. Get on line and go to www.goflightinc.com. On the GoFlight home page click Support. Click on “GF Config x.xx”… read more

Installing the GF-THR 737 Throttle Handles

Steps to Install GF-THR: Loosen the three (3) bottom 1/4” screws in bottom rear row of case. (Do Not Remove Yet) Remove two (2) screws on top, back of case. Remove three (3) 3/8” screws in bottom front row of case. Note: Front screws are longer than rear screws. Gently remove top cover. (Please pay… read more

Phone:
503-901-7573
Tech Support:
Tech Support: 503-688-7921
Address:
163 SW Freeman Avenue
Suite B
Hillsboro, Oregon 97123
Designed & Created by Pegasus Online