Call Today:  503-895-0242
You're a Go with GoFlight
Contact Us

Blog

Posts in Category: GF-TQ6

Main Lever Control Calibration GF-TQ6

Main Control Lever Calibration After connecting the GF-TQ6 to your computer for the first time, it is necessary to calibrate the six main control levers so that they have effect throughout their entire range of motion. After this process has been completed, you will not have to repeat the calibration steps unless you: (a) wish… read more

Configuring the GF-TQ6

Main Control Lever Calibration After connecting the GF-TQ6 to your computer for the first time, it is necessary to calibrate the six main control levers so that they have effect throughout their entire range of motion. After this process has been completed, you will not have to repeat the calibration steps unless you: (a) wish… read more

What’s included in the GF-TQ6 Package

After unpacking, please verify that your GF-TQ6 package contains the following items: Quantity Description 1 GF-TQ6 Throttle System Module enclosure and control assembly. 1 2-meter USB Cable. 4 Nylon 6-32 x 3/8” mounting thumbscrews. 4 Adhesive-backed rubber feet. 2 Detent plates for jet spoilers and flaps. The GF-TQ6 ships from the factory in a (4)… read more

Installation the GF-TQ6 & GF-TQ6 advance Software

Using a web browser go to http://www.goflightinc.com. On the GoFlight home page click “Support. Click on “GF Config x.xx” to download the latest module drivers and configuration software. Click “Run” or “Save” and follow the instructions to install the software. If the software installer detects that GoFlight software is already installed on your system, it… read more

Mounting the FG-TQ6

Rack and Custom Mounting The GF-TQ6 is designed for direct installation into the GoFlight GF-AC Full Height Rack or the Flight Deck Console (FDC) enclosures. Four 6-32 x 3/8” nylon thumbscrews are provided for this purpose. If you wish to mount the GF-TQ6 into a custom cockpit, threaded 6-32 holes are provided on the bottom… read more

Installing and Removing Detent Plates on a GF-TQ6

Your GF-TQ6 ships from the factory with two detent plates than can be optionally mounted to the top panel of the GF-TQ6 enclosure. These detent plates provide stopping points for the control levers in the A and F positions. One of the plates is designed to provide detents for spoiler control, with stops in the… read more

Installing and Removing Control Levers for GF-TQ6

The six main control levers and four switch levers on the GF-TQ6 can all be removed and/or replaced so that you can realistically model the operation of throttle and other controls found in many types of aircraft. For example, GoFlight offers an optional turboprop lever set including two power levers, two prop pitch levers, and… read more

GF-TQ6 & GF-TQ6 Advance Warranty

This product is warranted to the original purchaser to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase. During this warranty period, GoFlight Technologies, Inc. ® (“GoFlight”) will, at its option, repair or replace, at no charge, any component determined to be defective. The… read more

Connecting the USB Cable to a GF-TQ6

To connect the GF-TQ6 to your computer, use the 2-meter USB cable provided in the package, following these steps: Plug the USB cable “B” connector end (square) into the connector on the back of the GF-TQ6 enclosure. Plug the USB cable “A” connector end (rectangular) to a USB port on your computer. The first time… read more

Phone:
503-895-0242
Tech Support:
Tech Support: 503-688-7921
Address:
163 SW Freeman Avenue
Suite B
Hillsboro, Oregon 97123
Designed & Created by Pegasus Online